SanxinRequest a quoteQuote

Industrial Misting Fan: SXYDS-1.25PW Mobile Sprinkling Fan

The company has built fans in Xinchang, Zhejiang since 2001 and supplies OEM, ODM and customized units to drawings or samples.

Request a quote for this fan

Established
2001
Export experience
25 years
Inspection
100% of finished products
Mobile misting fan from Sanxin

Industrial Misting Fan for Outdoor Cooling and Dust Control

An industrial misting fan pushes air through a fine water mist, so the moving airstream carries moisture across a work area and the evaporation that follows lowers the felt temperature. The same airflow wets airborne dust and helps it settle. Typical placements are general examples rather than fixed rules: open work areas, loading docks, workshops, livestock buildings and outdoor event spaces. The fan is chosen for the space, not the other way round, so airflow, mist volume and where the water drains away matter as much as the size of the unit.

  • Airflow and throw: how far the airstream must reach before it loses effect.
  • Mist output: fine enough to evaporate, wet enough to settle dust.
  • Water supply: a tank carried on the unit or a hose feed from a fixed point.
  • Power supply: the voltage and current available where the fan will stand.
  • Mobility: wheels and weight if the unit moves between areas during a shift.
  • Layout and drainage: obstructions, walking routes and where surplus water goes.

For a big misting fan over a large outdoor area, start with area size and layout, then the airflow and throw distance needed to reach the far edge. Mist volume follows what the space is used for: heat relief, dust suppression or both. Decide whether a water tank or hose feed suits the site, check the power available at the position, and confirm mobility and drainage. Buyers can share site dimensions and utility constraints through the inquiry form so Sanxin can discuss a suitable fan or a customized arrangement.

A commercial misting fan is judged on how it fits a working day, so compare options by runtime, airflow, mist output, portability, water connection, power supply and the environment it will face. Sanxin manufactures mobile misting fans, offers OEM and ODM production, and makes customized fans to drawings or samples. Buyers can describe their application through the inquiry form and the team will match the request to the SXYDS-1.25PW mobile sprinkling fan or a customized build.

Mobile misting fan specifications

Mobile misting fan specifications
ParameterValue
Power~3~380V 50Hz three-phase four-wire system ( customizable )
Watt550W

How Misting Fans Cool Air and Suppress Dust

Cooling from a misting fan is evaporative. Water leaves the nozzle as very fine droplets, the airstream spreads them over the working area, and as they evaporate they take heat from the surrounding air. The result is a drop in felt temperature rather than refrigeration, so the effect depends on airflow, droplet size and local humidity. In dry, moving air the same fan produces a clearer cooling effect than in humid, still air.

Dust suppression uses the same airstream differently. Larger droplets wet particles so they become heavier and settle instead of drifting. That makes a misting fan useful around material handling, demolition edges and yard traffic, provided the ground can take the water and drainage is planned. Water quality also matters: hard water leaves scale on nozzles, so filtration and a nozzle cleaning routine keep the spray pattern steady across a season.

Misting fans come in several general arrangements. Mobile units on wheels can be rolled to where the heat or dust is; pedestal and oscillating versions cover a smaller area from a fixed point; units built into a wall or duct serve enclosed spaces. High-pressure and low-pressure nozzle systems differ in droplet size and water use. Each arrangement trades coverage against portability, water supply and power demand.

Ordering the Mobile Sprinkling Fan from Sanxin

Orders normally begin with the fan type, the size, the voltage and the airflow the site needs. From those details Sanxin proposes a model, prepares a sample where required, then moves through production, inspection and shipping. The company quotes on FOB, CIF or CNF terms as agreed with the buyer, and replies to inquiries within 12 hours on working days.

Production is spread across sites in Shaoxing, Huzhou and Guangzhou, with a central R&D centre in Hangzhou and an international marketing centre in Hong Kong. Annual production exceeds 200,000 units. Products are inspected after every process, with 100% inspection of finished products to the customer’s requirements, and Sanxin’s own testing lab checks fans before dispatch. Ningbo and Shanghai are the nearest ports.

Sanxin develops about 30 new products a year, and its engineering team and mould factory handle OEM and ODM work for buyers who need a fan built to their own requirements. Fan blades and guards are made in the company’s own workshops, which helps when a customized unit needs a different blade set or guard. More background on the company sits on the about page.

How an order runs

Send your requirements
Fan type, size, voltage and frequency, airflow and pressure, and the equipment the fan goes into.
Model proposal
Sanxin proposes a matching model, or a custom design to your drawings or samples.
Payment terms
Payment is agreed with each order, usually by T/T; L/C is also accepted.
Production and inspection
Inspection after every process and 100% inspection of finished products to your requirements.
Delivery
Delivery time is confirmed with each order by model and quantity.

Request a quotation

Send the model or size, electrical supply and quantity; we will confirm a matching fan.

Or write to sales@axialfansupplier.com

* Required