Axial Fan Range for Air-Conditioning, Industry and Agriculture
Sanxin has made axial flow fans in Xinchang, Zhejiang since 2001, supplying air-conditioning, industrial ventilation and livestock airflow duty from a single factory floor, alongside centrifugal fans, large energy-saving fans and anti-frost fans.
- Established
- 2001
- Export experience
- 25 years
- Inspection
- 100% of finished products

Axial Fan Range for Air-Conditioning, Industry and Agriculture
Sanxin is a fan manufacturer based in Xinchang, Zhejiang, established in 2001. The company makes axial flow fans alongside centrifugal fans, large energy-saving fans and anti-frost fans, with annual production above 200,000 units. Buyers who need a single axial fan source for air-conditioning units, workshop ventilation and farm buildings can place the whole requirement with one supplier, and Sanxin supports OEM and ODM work as well as drawing-based, sample-based and full customization.
Across the listed product pages the range runs from formal and suction type axial fans in the DZF, LZF, SZF, ECDZF and ECLZF series to aluminium fan blades for commercial axial fans and matching fan guards. That is the whole category here: complete fans, blades and guards. Each model carries its own rated power, speed, phase, voltage, frequency and motor protection class, set out in the table below, so the figures are read per model rather than as a range-wide specification.
Axial fan specifications
| Model | Rated power | Rated speed | Phase | Rated voltage | Frequency | Motor protection class |
|---|---|---|---|---|---|---|
| SZF610-5 | 250W | 700rpm | Three-phase | AC380V+10% | 50Hz | IP54 |
| DZF6.6-27x4 | 650W | 920 rpm | Three-phase | AC380V±10% | 50Hz | IP55 |
| DZF6-32x5 | 450W | 920 rpm | Three-phase | AC 380V±10% | 50Hz | IP54 |
| DZF6-26x5 | 370W | 930 rpm | Three-phase | AC 380V±10% | 50Hz | |
| DZF6-29x3 | 250W | 830 rpm | Single-phase | AC220V±10% | 50Hz | IP54 |
| DZF5.5-35x5 | 370W | 930 rpm | Three-phase | AC380V±10% | 50Hz | IP54 |
| DHZF5.6-33x4 | 250W | 830 rpm | Single-phase | AC220V±10% | 50Hz | IP54 |
| DHZF5.6-29x4 | 250W | 930 rpm | Three-phase | AC 380V±10% | 50Hz | IP54 |
An Axial Fan Supplier for Air-Conditioning, Ventilation and Farm Airflow
On an air-conditioning outdoor unit, the fan is an axial fan that pulls air across the condenser coil, so it has to match the frame size, the mounting pattern and the airflow direction of the unit. Aluminium fan blades and fan guards are supplied as the matching components, and OEM/ODM work or production to your drawings or samples is available. See condenser fans.
In an axial flow fan the impeller draws air in parallel to the shaft and discharges it along the same axis, which gives high airflow at a comparatively low pressure rise. Selection depends on the airflow required, the resistance of the system, the frame diameter, the speed and the drive type, and on whether the fan is formal or suction type. Achievable pressure follows blade design, speed and system resistance, so a long or restrictive duct needs the duty point shared rather than a type assumed. The DZF, LZF, SZF, ECDZF and ECLZF models listed on this page are the axial flow fans for these duties.
For exhaust duty an axial exhaust fan removes air from a room through a wall opening or a duct. The mounting arrangement, the opening size, the airflow direction and the guard or shutter requirement drive the choice, because an exhaust fan has to suit the structure it sits in. Sanxin’s listed exhaust ventilation product and the axial fan models on this page are the candidates. Opening dimensions and drawings are what we need to recommend a model.
Factories, warehouses and livestock buildings need high air volume over large spaces, so industrial axial fans are chosen with mounting height, building size and airflow pattern in mind. Sanxin runs production bases in Shaoxing, Huzhou and Guangzhou plus its own testing lab, and offers OEM/ODM production, while the livestock fans and aluminium blades for commercial axial fans are made in the same workshops. DC and EC axial fans use electronically controlled motors, which allows speed control and different efficiency behaviour from AC motors, so the choice follows the available power supply and control method.
Axial Blowers and Axial Fan Blowers
An axial blower is an axial fan used to push air through a space or duct. Both terms describe the same airflow principle: the air moves along the axis of the fan. The axial fan model list on this page is the place to match a frame size to a duty, and the inquiry form is the place to ask for a selection.
For an axial fan blower unit, a quotation is easier to prepare when the request carries the frame size or opening dimensions, the required airflow direction, whether the fan is formal or suction type, the supply voltage and the mounting position. Sanxin quotes on FOB, CIF or CNF terms as agreed. Blades and guards are quoted with the fan, and customization to drawings or samples is available where a standard frame does not fit. Performance depends on the duty point, so the airflow figure and the resistance of the duct are worth stating.
How an order runs
- Send your requirements
- Fan type, size, voltage and frequency, airflow and pressure, and the equipment the fan goes into.
- Model proposal
- Sanxin proposes a matching model, or a custom design to your drawings or samples.
- Payment terms
- Payment is agreed with each order, usually by T/T; L/C is also accepted.
- Production and inspection
- Inspection after every process and 100% inspection of finished products to your requirements.
- Delivery
- Delivery time is confirmed with each order by model and quantity.
Request a quotation
Send the model or size, electrical supply and quantity; we will confirm a matching fan.
Or write to sales@axialfansupplier.com