SanxinRequest a quoteQuote

HVLS Fans for Warehouse Air Movement and Ventilation

Sanxin manufactures HVLS industrial ceiling fans for large warehouses, with models in 10ft (3.0m), 12ft (3.7m) and 24ft (7.3m) diameters. Slow, wide air movement helps mix air across the floor and reduce temperature layers.

Request a quote for this fan

Established
2001
Export experience
25 years
Inspection
100% of finished products
HVLS industrial ceiling fan from Sanxin

Warehouse Air Movement and Layout Planning

Sanxin manufactures HVLS fans for warehouse air movement in 10ft (3.0m), 12ft (3.7m) and 24ft (7.3m) diameters. A large-diameter fan turning slowly moves a high volume of air at low speed, mixing and destratifying air across a wide floor instead of creating a narrow fast draft. Fan count and position depend on ceiling height, floor area, racking obstructions and available mounting points. Send your warehouse dimensions through the inquiry form and Sanxin can recommend a suitable model.

Ceiling height sets the practical limit for blade clearance and for the depth of the air column a fan can reach. Floor area and racking layout show where air must travel and where mounting points are obstructed. A fan placed over a clear central aisle behaves differently from one above dense racking. These are general planning checks that help a buyer compare models without assuming the same result in every building.

For warehouse ventilation, HVLS fans are often considered alongside axial fans for wall or ducted air paths and centrifugal fans for compact pressure work. The fan types serve different duties. The table below summarises the HVLS models; use it with your building dimensions when preparing an inquiry.

HVLS fan specifications

HVLS fan specifications
FanMotorVoltageNoiseSize
10ft (3.0m) High Value Less speedbldc Industrial FanDC Brushless Motor220V55dBDiameter from 3.0 m to 7.3m
12ft (3.7m) BLDC Industrial Ceiling Fan For MosqueDC Brushless Motor220V55dBDiameter from 3.0 m to 7.3m
High Value Less Speed bldc Industrial FanDC Brushless Motor220V55dBDiameter from 3.0 m to 7.3m
12ft (3.7m) BLDC Industrial Ceiling Fan VentilationDC Brushless Motor220V55dBDiameter from 3.0 m to 7.3m
24ft (7.3m) Lenze Brand Gear Box Large Industrial Ceiling FanImport From Germany380V Or 220V65dbDiameter 5m To 7.3m

Matching HVLS Fans to Warehouse Height, Area and Racking

HVLS means high volume low speed. An HVLS fan has a very large diameter and runs at low rotational speed, moving a large air volume quietly, unlike a small high-speed fan. A high volume low speed fan relies on a large swept area and continuous air movement over a wide radius. The slow, wide air column mixes warmer air at the roof with cooler air below, so the effect is air mixing and destratification rather than a narrow fast jet. In a tall open building, this supports comfort and air mixing through the occupied zone.

Sanxin manufactures these industrial ceiling fans: the 10ft (3.0m) high volume low speed BLDC industrial fan, the 12ft (3.7m) BLDC industrial ceiling fan for mosque ventilation and the 24ft (7.3m) large industrial ceiling fan with Lenze brand gear box. This fan type serves warehouses, workshops and other large halls. For a single unit, match diameter and speed to ceiling height and the floor area the fan must serve, check the structural mounting point and the available power supply, then use this model list and the inquiry form for help choosing the unit.

The range includes 10ft (3.0m), 12ft (3.7m) and 24ft (7.3m) industrial ceiling fans, each as its own model. A big industrial fan needs enough ceiling height and a suitable mounting structure to keep the blades clear of people, racking, lights and sprinkler heads. Each model keeps its own diameter and drive; a check for a given model does not transfer to another. For a warehouse, coverage per fan depends on diameter, mounting height and speed; big industrial fans are usually spaced over working aisles and occupied zones, with positions checked against racking, lighting and sprinkler layout. Send a floor plan and ceiling height for a suggested layout through the inquiry form.

Sanxin was founded in 2001 and is based in Xinchang, Zhejiang, with production bases in Shaoxing, Huzhou and Guangzhou, a Hangzhou R&D centre and a Hong Kong marketing centre. Sanxin offers high volume low speed HVLS fans in 10ft, 12ft and 24ft sizes with OEM/ODM production; send quantity, voltage and destination port through the inquiry form or sales email. Industrial big fans can be customised through drawing-based, sample-based and full customization plus OEM, ODM and OBM production. Sanxin makes fan blades and fan guards as well as complete fans; send drawings or samples with your request.

How an order runs

Send your requirements
Fan type, size, voltage and frequency, airflow and pressure, and the equipment the fan goes into.
Model proposal
Sanxin proposes a matching model, or a custom design to your drawings or samples.
Payment terms
Payment is agreed with each order, usually by T/T; L/C is also accepted.
Production and inspection
Inspection after every process and 100% inspection of finished products to your requirements.
Delivery
Delivery time is confirmed with each order by model and quantity.

Request a quotation

Send the model or size, electrical supply and quantity; we will confirm a matching fan.

Or write to sales@axialfansupplier.com

* Required